4D Systems Smart OLED Display

UOLED-128-G2

Low-cost OLED display graphics user interface solution

Visit this product in Rutronik 24 – Link

128 x 128 resolution, 65k true to life colours, PMOLED screen.
1.5″ diagonal size, 45.5 x 33.5 x 6.1mm. Active area: 27mm x 27mm.
No back lighting with near 180° viewing angle.
Easy 10 pin interface to any external device: VCC, TX, RX, GND, RESET, IO1, IO2, 3.3V.
Powered by the 4D-Labs GOLDELOX graphics processor highly optimised for 4DGL, the high level 4D Graphics Language.
2 x GPIO ports supports:
Digital I/O
A/D converter with 8/10bit resolution
Complex sound generation
Dedicated RTTTL tune engine
Multi-Switch Joystick
Dallas 1-Wire
10kbytes of flash memory for user code storage and 510bytes of RAM for user variables (255 x 16bit vars).
1 x Asynchronous hardware serial port, TTL interface, with 300baud to 600kbaud.
On-board micro-SD memory card adaptor for storing of icons, images, animations, etc. Supports 64Mb to 2Gb micro-SD memory cards. A SPI compatible micro-SD card is required.
Comprehensive set of built in high level 4DGL graphics functions and algorithms that can draw lines, circles, text, and much more.
Display full colour images, animations, icons and video clips.
Supports all available Windows fonts and characters (imported as external fonts).
4.0 – 5.5V range operation (single supply).
Module dimensions: 36 x 36 x 13.7mm (including corner plates).
Weighing ~10g.
Display Viewing Area: 27 x 27mm
Back plate with 4 x 3 mm holes for mechanical mounting.
RoHS Compliant.
CE Compliant (Modules with the CE Mark)

THIS DISPLAY CAN BE ADAPTED TO ARDUINO SBC WITH 4D Arduino Adaptor Shield II DISMON1274