RN1810 / RN1810E – New WiFi IEEE 802.11 b/g/n Modules

The RN1810 and RN1810E are ultra-low power, 2.4 GHz IEEE 802.11b/g/n surface mount modules. The modules are a complete Wi-Fi solution with on-board TCP/IP networking stack, integrated PCB trace antenna or UFL connector, cryptographic accelerator, power management subsystem, real-time clock, 2.4 GHz transceiver and RF power amplifier.

The RN1810 is fully-certified, freeing the designer from RF and antenna design regulatory compliance testing, which provides faster time to market. The modules are configured with a simple ASCII command language which speeds up prototyping and shortens development time. In the simplest configuration, the module requires only power, ground and UART TX and RX connections. The RN1810 has an integrated PCB trace antenna (Part Number RN1810-I/RM100) and the RN1810E has an ultra-small U.FL connector for external antennas (Part Number RN1810E-I/RM100)

The modules are FCC, IC, European R&TTE, Australia/New Zealand, Korea, Taiwan & Japan certified

Coming soon: RN1811 / RN1811E modules with SPI interface!

FEATURES

IEEE 802.11b/g/n Compliant Transceiver
2.4 GHz IEEE 802.11n Single Stream 1×1
Single Operating Voltage: 3.15V to 3.45V (3.3V typical)
Temperature Range: -40°C to +85°C
UART Interface to Host Controller
Configured using simple ASCII commands
Integrates easily into final product – Minimizes product development & provides quick time to Market
Fully integrated wireless module with voltage regulation, crystal, RF matching circuitry, Power Amplifier (PA), Low Noise Amplifier (LNA), and PCB Trace Antenna
Ultra-small U.FL connector for external antennas (RN1810E)
Compact surface mount module: 17.8 mm x 26.7 mm x 2.2 mm
Castellated Surface Mount Pads for easy and reliable PCB mounting
Environmentally Friendly, RoHS Compliant
FCC, IC, European R&TTE, Australia/New Zealand, Korea, Taiwan & Japan Certified