NJRC: NJM2884AKH1-33 is a low dropout voltage regulator with ON/OFF
The NJM2884AK1 is a low dropout voltage regulator with ON/OFF control.
Advanced Bipolar technology achieves low noise, high ripple rejection and low quiescent current.
It delivers up to 5V/500mA output power with the maximum input voltage of 10V.
GENERAL DESCRIPTION :
The NJM2884/A is a low dropout voltage regulator with ON/OFF control. Advanced Bipolar technology achieves low noise, high ripple rejection and low quiescent current. It delivers up to 5V/500mA output power with the maximum input voltage of 10V. The NJM2884/A is suitable for audio/video and PC related applications. The “U2” suffix product achieves high PD compared with “U1” although the same package outline (SOT-89-5) .
High Ripple Rejection 75dB typ. (f=1kHz, Vo=3V Version)
Low Output Noise Voltage Vno=45µVrms typ.
Output capacitor with 2.2µF ceramic capacitor (Vo≥2.7V)
Output Current Io(max.)=500mA z High Precision Output Vo±1.0% z Low Dropout Voltage 0.18V typ. (Io=300mA)
ON/OFF Control Function z Internal Thermal Overload Protection
Internal Short Circuit Current Limit z Bipolar Technology
Applications: audio/video and PC related applications
In the case where ON/OFF Control is not required:
In use of ON/OFF CONTROL:
*In the case of using a resistance “R” between VIN and control. If this resistor is inserted, it can reduce the control current when the control voltage is high. The applied voltage to control terminal should set to consider voltage drop through the resistor “R” and the minimum control voltage for ON-state. The VCONT (ON) and ICONT have temperature dependence as shown in the “Control Current vs. Temperature” and ” Control Voltage vs. Temperature” characteristics. Therefore, the resistance “R” should be selected to consider the temperature characteristics.
Input Capacitor CIN Input Capacitor CIN is required to prevent oscillation and reduce power supply ripple for applications when high power supply impedance or a long power supply line. Therefore, use the recommended CIN value (refer to conditions of ELECTRIC CHARACTERISTIC) or larger and should connect between GND and VIN as shortest path as possible to avoid the problem. *Output Capacitor CO Output capacitor (CO) will be required for a phase compensation of the internal error amplifier. The capacitance and the equivalent series resistance (ESR) influence to stable operation of the regulator. Use of a smaller CO may cause excess output noise or oscillation of the regulator due to lack of the phase compensation. On the other hand, Use of a larger CO reduces output noise and ripple output, and also improves output transient response when rapid load change. Therefore, use the recommended CO value (refer to conditions of ELECTRIC CHARACTERISTIC) or larger and should connect between GND and VOUT as shortest path as possible for stable operation The recommended capacitance depends on the output voltage rank. Especially, low voltage regulator requires larger CO value. In addition, you should consider varied characteristics of capacitor (a frequency characteristic, a temperature characteristic, a DC bias characteristic and so on) and unevenness peculiar to a capacitor supplier enough. When selecting CO, recommend that have withstand voltage margin against output voltage and superior temperature characteristic.