JAE – ES3-WF2 Series – LED power supply Board-to-Cable Connector
The ES3 series is a 2-position board-to-cable type connector that is ideal for LED lighting devices like LED light bulbs, and downlights. This connector enables direct connection of the converter board and the LED mounting board with a cable. The pin connector for the LED mounting board is available in embossed reel packaging for SMT automated mounting. It allows reflow solder mounting to the LED mounting board to occur at the same time that other LED chips and SMT electrical parts are mounted. Low-profile design (mounting height: 1.65mm) to prevent interference with emission of LED light. Insulation for pin connector uses white LCP with superior heat and light resistance ideal for the mounted environment. Board-to-cable connection of LED mounting board and converter board allows for greater freedom in the layout of parts. Mechanical lock strongly resists vibration and pulling to prevent un-mating and incomplete mating. Uses the IL-Z series socket contact, which has a long sales history. cULus Certification: File No. E67741
General Specifications
- # of contacts: 2 positions
- Current: 2 A
- Rated voltage: AC/ DC 200 V
- Contact resistance (initial): 30 milliohms max.
- Dielectric withstanding voltage: 2000 VACr.m.s. (1 minute)
- Insulation resistance (after test): 10 megohms min.
- Connector insertion force: 15 N max.
- Applicable wire: #26 to #22 AWG
- Durability mating cycles: 20 times
- Operating temperature range: -40 Deg. C to +105 Deg. C
