Murata: OKLP-X/35-W12-C 35A Power Block DC-DC Converter Module for FPGA and Embedded Applications
The Power Block design approach allows the power engineer to achieve the highest efficiency and maximum possible power and current density while maintaining a high performance system at a lower cost when compared to a complete module design approach. The Power Block provides a single-package solution that incorporates all of the power handling components, fully tested and characterized for thermal and dynamic performance.
The Power Block design approach is ideal for today’s power-hungry FPGAs, ASICs, computing, and IBA architectures. Most analog or digital PWM controllers can be used with the Power Block; however, the maximum benefits are achieved when coupled with ZMDI’s ZSPM1035 single-phase digital PWM IC controller family.
The combination of ZMDI’s ZSPM1035 and the 35A Power Block provides a ready, tested, and optimally preconfigured 35A point-of-load solution. Designers have access to a full downloadable construction kit that includes step-by-step instructions and a software wizard. ZMDI’s Pink Power Designer™ GUI allows fast module configuration that speeds time-to-market. The digital control loop provides ultra-fast transient response, steady-state performance, stability, and design flexibility. Up to four different output capacitor ranges can be supported by selecting the preconfigured ZMDI controller.
Product Features:
- High efficiency (94%,12Vin, 3.3Vout@25A)
- Power Block (35A, 7-13Vin, 0.8-3.6Vout, SMT)
- Small footprint (1″ [25.4] x 0.5″ [12.7] x 0.44″ [11.1])
- No minimum load required
- Low Output Ripple
- -20°C to 70°C operating temperature
- Strong Thermal Performance
