ASUS Tinker Board 2 / 2S – powered by Rockchip ARM® 6-core SoC
ASUS Tinker Board 2 / 2S enables performance computing at low power consumption. The new ASUS Single-Board Computer (SBC) Series is based on a Rockchip ARM® 6-core CPU and features ARM big.LITTLE™ technology. The essential difference between the boards (2 / 2S) is the additional OnBoard Storage of 16GB eMMC on Tinker Board 2S.
Main Features:
ASUS Tinker Board 2 / 2S is powered by ARM® 6-core Rockchip RK3399 with new 64-bit Armv8 architecture. The ARM big.LITTLE™ technology allows the pairing of Dual 2.0 GHz Cortex-A72 and Quad 1.5 GHz Cortex-A53 processors in a single system on a chip (SoC). The board is equipped with a Mali-T860 multi-core GPU, designed for complex graphics applications.
Additionally, a variety of software and support options are offered:
- Easy setup tool for configuration and performance optimization
- Pro-grade admin plus FOTA (firmware over-the-air) support
- Android 10 support for better 3D computing performance
Compared to many other popular SBC’s ASUS Tinker Boards 2 / 2S shows improved performance and speed. In addition, the board is Microsoft Azure certified.
Specifications – ASUS Tinker Board 2 / 2S:
CPU: Rockchip RK3399 (Dual-Core ARM® Cortex®-A72 @ 2.0 GHz and Quad-Core ARM® Cortex®-A53 @ 1.5 GHz)
GPU: ARM® Mali™-T860 MP4 GPU @ 800 MHz
Display: 1x HDMI™ with CEC hardware ready, 1x USB Type C® (DP Alt Mode), 1x 22-pin MIPI DSI (4-Lane)
OnBoard Memory: DUAL-CH LPDDR4 2GB / 4 GB
Storage: 16GB eMMC NAND Flash (only on Tinker Board 2S) + Micro-SD(TF) card slot (push/pull)
Connectivity: 1x RTL8211F-CG Gb Ethernet LAN + 1x M.2 – 8002.11 a/b/g/n/ac Wireless & Bluetooth 5.0 (2T2R)
Audio: 1x HDMI™ audio output, 1x S/PDIF TX pin (from GPIO), 1x PCM/I2S pins (from GPIO)
USB: 3x USB 3.2 Gen1 Type A ports and 1x USB 3.2 Gen1 Type C® OTG port
Camera Interface: 1x 15-pin MIPI CSI-2 (2-lane)
Internal Headers:
- 40-pin I/O Header:
- up to 28 x GPIO pins
- up to 2 x SPI bus
- up to 2 x I2C bus
- up to 2 x UART
- up to 3 x PWM
- up to 1 x PCM/I2S
- up to 1 x S/PDIF TX
- 2 x 5V power pins
- 2 x 3.3V power pins
- 8 x ground pins
- 1 x 2-pin Recovery header
- 1 x 2-pin Power-on header
- 1 x 2-pin Reset header
- 1 x 2-pin Debug UART header
- 1 x 2-pin DC Fan header
- 1 x 2-pin RTC Battery header
Power Connector: 1x 12 – 19V DC Power Input Jack (up to 65W)
OS Support: Debian 9 / Android 10
Dimension: 3.37-inch x 2.125-inch (85 x 56 mm)
Environment:
- Operation temp: 0°C – 60°C
- Non-operation temp. -40°C – +85°C
- Non-operation humidity: 0% – 85% (non-condensing)
Available at Rutronik24
Datasheet: