RECOM RACPRO1-4SP DIN Rail e-Fuse Series

Description: Protect your automation system. With this e-Fuse you can split your power source in four individual power supplies.

The RACPRO1-4SP series are 4-channel electronic fuse (e-Fuse) load switches with independent overcurrent limit control and real-time output current indication. Each channel is separately protected so that overload or fault conditions on an individual load do not affect overall system reliability or function. The useful LED indicators show the output current and change from green to yellow (current within limit) to orange (current at limit) to red (overcurrent or short-circuit). A volt-free DC-OK output can be used to monitor system function. Each channel can also be switched ON or OFF to ease fault diagnostics or for maintenance.

The RECOM e-Fuses are available with 5A & 10A maximum channel current and 150% power boost for 5s but can handle >150% overload for up to 100ms to avoid nuisance tripping. The channels power up in sequence to reduce the input inrush current with a pre-settable delay time. Under system overload conditions, the channels will disconnect the loads in reverse sequence, keeping essential functions running to the last.

Output overload hiccup or tripping mode is adjustable by a switch and the 5A modules can also be set to limit the available power to below 100W for LPS installations (NEC Class 2).

The e-Fuses have a high lifetime expectancy >80.000h/40°C and easy wiring with tool-less push-in and lever-release terminals. The input and output terminals are also paired to allow easy daisy chaining.

Main features:

Push-in connectors for tool-less wiring
Start-Up delay adjustable by switch
Individual switching for every channel
Adjustable power limit & load indication by LED
Individual ON/OFF and OCP limit for each channel
Short circuit protection & power boost 150%/5s
DC input UVLO protection
DC-OK contacts with remote fault reset
Overload priority channel protection
Output hiccup or tripping mode adjustable by switch
Easy daisy chaining of multiple modules
Paired Input & output (+, -) connectors included
3 year warranty

Dimensions (HxWxD):
110.2 x 72.0 x 61.9mm
(4.34 x 2.83 x 2.44 inch)
250g (0.55 lbs)

Part Number	Rutronik Part Number	Input Voltage Range (VDC)	Output Voltage (VDC)	Output Current (A)	Efficiency typ (%)	rated Output Power(W)
RACPRO1-SP/24V/5A	ICACDC1097	22-28	24	4*5.0	98.6	480	DS
RACPRO1-SP/24V/10A	ICACDC1096	22-28	24	4*10.0	98.6	960	DS