Schurter – Robust metal pushbutton MSM LA and MSM LA CS
Robust metal pushbutton switch family with 16 A switching current at 250 VAC
SCHURTER’s MSM LA and MSM LA CS latching-action stainless steel and ceramic surface pushbutton switches are available with a maximum rated switching current of 16 A at 250 VAC, uprated from 12 A. Designed for primary ON/OFF switching, the up-rating on the MSM LA and LA CS expands on their suitability for use in appliances with higher loads.
SCHURTER’s MSM LA series offers a classic stainless steel actuator, with optional point or ring illumination, while the MSM LA CS series offers SCHURTER’s innovative scratch resistant backlit ceramic surface. The LED supply voltage is 24 VDC. The multi-faceted pushbuttons are available with mounting diameters of 19 and 22 mm, and equipped with blade terminals for quickly affixing wires: the pre-assembled cable set is plugged into the quick-connect terminals of the microswitch, which is then snapped into the switch housing. The MSM LA and MSM LA CS series switches comply with the EU low voltage directive, IEC 61058-1 and UL 1054 standards. The microswitches are ENEC, UL, CSA and CQC approved.
Featured Products
MSM LA 19 and 22 (16 A)
Illumination options: Point Illumination (PI) and Ring Illumination (RI)
MSM LA CS 19 and MSM LA CS 22 (16 A)
Illumination options: Area Illumination (AI)
| – | MSM LA series with stainless steel housing and actuator |
| – | MSM LA CS series with stainless steel housing and scratch resistant ceramic surface actuator |
| – | Mounting diameters: 19 and 22 mm |
| – | Range includes existing 12 A and new 16 A current ratings |
| – | Robust vandal-proof switches for use in harsh environments |
| – | Switches available with illumination and lettering |
| – | Operating temperature: -20 °C to +85 °C |
| – | Ingress protection rating IP64 and impact resistance rating IK07 |
| – | Quick installation: pre-wired microswitch quick-connects and snap onto switch housing from rear |
| – | Microswitch with ENEC, UL, CSA and CQC approvals |
| – | Switch series complies with the EU low voltage directive, IEC 61058-1 and UL 1054 standards |
