Tiny SMD Power Inductors
New Series of Tiny SMD Power Inductors – T-Series
knitter-inductive implemented the new SMD Power Inductor T-Series, which offers a large saturation current at a very small physical size, on the market.
The new, magnetically fully shielded Inductors are mainly used for DC/DC convertors, voltage regulator modules, embedded PCs and switch mode power supplies.
knitter-inductive offers the inductor in many different physical sizes, from 1.6 x 0.8 x 0.8 mm up to 6.6 x 6.4 x 3.1 mm.
The new ICSIxxxxxxTxSHyST12 series is available from an inductance range of 0.10 μH to 10.0 μH, a saturation current range of 1.3 A up to 35.0 A and DCR values starting from 2.0 mΩ.
The new T-Series combines many benefits, such as the solid wire which is used for the inner winding and offers a high current and low DCR rating. Next to this the shielded design at a very compact base size that enables the use in a wide range of applications.
The operation temperature is rated from -40°C to +125°C.
The parts are standardly packed in Tape&Reel for a cost efficient and fast assembling process on customer side.
Features
- size: 1.6×0.8×0.8mm up to 6.6×6.4×3.1mm
- inductance range: 0.1 to 10uH
- saturation current: 1.3A up to 35A
Applications
- DC/DC converters
- VRM
- SMPS
- embedded PCs
Link to the Datasheet
https://knitter-inductive.com/Products/ICS/smd-power
